DIGITAL FILE Crawler C23 Flatbed - 1/10 RC Body attachment
THIS IS A DIGITAL FILE FOR 3D PRINTING, NOT A PHYSICAL PRODUCT.
PLEASE make sure your 3D printer is able to print a minimum size of 160x120x140mm (EXCLUDING battery box), 190x120x140mm (INCLUDING battery box) before purchasing.
Designed specifically as an add-on attachment (i.e. The truck body is sold separately) for the C23 “Workhorse” in 4x4 and 420mm wheelbase configuration (will not work with shorter wheelbase builds), the flatbed enhances the looks of the C23 as well as gives it a true utilitarian use, making it a true Workhorse!
Check out the build here
Also check out the C23 “Workhorse” truck body here!
The flatbed comes in many options and details, including some bonuses. Despite it being only a 12 piece print, there are a total of more than 40 files for you to choose from to best fit your style and needs, i.e. not all files are necessary!
Starting off with the light buckets on the headache rack and on the bumper, 5mm LEDs can be mounted for scale realism.
A battery box is also included which is designed to be directly mounted onto the flatbed’s floor. The battery box is also disguised in a toolbox shape to blend in as a scale accessory, but it also functions well. The lid of the box can be opened in 2 ways to store or swap your battery, hinge and slide. This ensures the easiest battery swapping operations on the trail.
Beefy mounts for the flatbed are also included which have some degree of fore-aft adjustability. However the height is fixed. Therefore you may need to design the mounts yourself. Let us know if you need help designing them.
The bumper mount is also designed for an Axial SCX10 iii. However if your stock bumper mount just happens to be at the right length then there is no need for any customisation. Again, let us know if you need help designing it.
Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual
A .zip file containing all the print files is also included for convenience.
*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
Should you need any help, please do not hesitate to contact us!
Included Options
Cab:
-
Cab uncut (cab and roof are a 1 piece print. Requires a printer that can print a minimum of )
-
Cab cut (splits cab and roof into 2 piece print. Requires a printer that can print a minimum of
Doors:
-
Mock hinge (lookalike hinges can be mounted, but door cannot be opened)
-
Hinge alt. Version (flat sections on mock hinge to allow mounting of real hinges. Please use the appropriate “alt. Version” doors for use with “alt. Version” hinges.
Grille:
-
Big mesh grille (grille is opened and shows only the grille mesh)
-
Grille alt. Version (grille with bars going across)
Bumper:
-
Bumper (wide rectangular bars)
-
Bumper alt. Version (Rectangular bars with angled lowers for better clearance)
-
Files To Be Printed Multiple Times
- Bumper mount post (alt ver)
- Bumper light bucket lenses
Required Hardware
-
20x M3*10 Countersunk
-
12x M2*10 Socket Head
-
17x M3*15 Countersunk
-
8x M3*15 Socket Head
-
4x M3*20 Countersunk
-
2x M3*20 Socket Head
-
4x M3 Lock Nut
-
2x M3 Washer (8-10mm diameter)
-
13x M4x20 Grub Screw
-
1x Battery Strap (20-25mm width, 150-200mm length)
-
Assembly Instructions
Printing Tips
FDM printing:
Requires a printer that can print a minimum volume of: 160x120x140mm (EXCLUDING battery box).
190x120x140mm (INCLUDING battery box)
PLA+ filament
0.3mm layer heights
15-30% infill density
Minimal supports are necessary (NO SUPPORTS NEEDED for honeycomb-like panels for headache rack)
Finished and Assembled Size
308*237*208mm (All parts assembled, without C23 “Workhorse” cab)
607*240*218 (All parts assembled, with C23 “Workhorse” cab)
More pictures
More pictures can be found here: