top of page
DIGITAL FILE Crawler C23 Workhorse 1/10 RC Body

    • DIGITAL FILE Crawler C23 Workhorse 1/10 RC Body

    THIS IS A DIGITAL FILE FOR 3D PRINTING, NOT A PHYSICAL PRODUCT. Physical product sold separately.
     
    PLEASE make sure your 3D printer is able to print a minimum size of 155x245x165mm before purchasing.
     
    The C23 “Workhorse” is not your typical farm truck. Want to conquer all types of terrains? This is it. Designed for use with massive 135mm tyres (for 1/10 scale) this truck has more belly and axle ground clearance than even fully kitted out crawlers.
     
    The Workhorse is also a multi-purpose vehicle that can be used to haul cargo on and off-road. It can also be configured in 4x4 or 6x6 configuration (maximum 120mm tyre height for use with stock TRX6 chassis/wheelbase), for scouting and towing purposes. In 4x4 configuration it is recommended to use a 420mm wheelbase. It is also recommended to use a tyre to tyre outermost width of 240mm for all wheelbases. Wider tyres or a wider track will allow the truck to be more stable at the cost of the turning circle. 
    Scale diagrams are shown for mock-up wheelbase setups.
     
    The grille can be swapped out for an alternate version included with the files. The other version has straight horizontal bars going across.
     
    The bonnet can be hard mounted onto the cab for extra rigidity, or it can also be hinge mounted to the bumper as the included magnet mount can hold the bonnet shut. Similarly the doors can also be hinge mounted with the included “alt.” versions for extra realism. The mirrors too are designed to pivot.
     
    LEDs light buckets are included so 5mm and 3mm LEDs can be added to the headlights and fender lights. Body mounting holes are designed for easier mounting without having to do measurements. 
     
    The radiator and interior’s dashboard along with the steering wheel are now included and can be bolted on easily without any modifications. 2.2 mock wheel hubs are also included just to add even more realism.
     
    A pair of body mounts and bumper posts are also included. However it most likely needs to be modified to fit different builds.
     
    Bonus battery box (maximum battery size 168Lx52Wx55H) shown in the picture is also included as a thank you!
     
    Assembly instructions:
    View the link below to download the assembly instructions
    https://www.aheadrc.com/manual

     
    A .zip file containing all the print files is also included for convenience. DXF files for the windows are also included.
     
    *It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
     
    Should you need any help, please do not hesitate to contact us!

    • Included Options

      Cab:

      • Cab uncut (cab and roof are a 1 piece print. Requires a printer that can print a minimum of )

      • Cab cut (splits cab and roof into 2 piece print. Requires a printer that can print a minimum of 

       

      Doors:

      • Mock hinge (lookalike hinges can be mounted, but door cannot be opened)

      • Hinge alt. Version (flat sections on mock hinge to allow mounting of real hinges. Please use the appropriate “alt. Version” doors for use with “alt. Version” hinges.

       

      Grille:

      • Big mesh grille (grille is opened and shows only the grille mesh)

      • Grille alt. Version (grille with bars going across)

       

      Bumper:

      • Bumper (wide rectangular bars)

      • Bumper alt. Version (Rectangular bars with angled lowers for better clearance)

    • Files To Be Printed Multiple Times

      • Door handle x2

      • Big orange (fender lights) x2

      • Small orange (fender lights) x4

      • Headlight lens x2

      • Mock cab lights x5

      • Windshield hinge x2

      • Cab side bolts x8

      • Handlebar x2

      • Non threaded wipers x2

      • Bumper lens x2

      • Mirror x2

      • Mirror mount lower x2

    • Required Hardware

      • 8x M2*5 Socket head

      • 18x M2*10 Socket head

      • 20xM3*5 Socket head

      • 15x M3*10 Socket head

      • 6x M3*10 Countersunk

      • 3x M3*15 Socket head

      • 1x M3*30 Socket head

      • 1x M3 Lock nut

      • 2x  15*2 or 20*2mm magnet with countersunk hole

    • Assembly Instructions

      Assembly Instructions

    • Printing Tips

      FDM printing:

       

      Requires a printer that can print a minimum volume of: 245x155x165mm.

       

      PLA+ filament

      0.3mm layer heights

      10% infill density

      Supports are necessary

    • Finished and Assembled Size

      291*240*218mm (All parts assembled)

    • More pictures

      More pictures can be found here:

      More pictures

    HK$120.00Price
    bottom of page