top of page
ahead RC M1070 Wrecker Crane and Winch

DIGITAL FILE - M1070 Wrecker Crane and Winch for TRX6 - 1/10 RC body attachment

M1070 HET TRUCK CAB NOT INCLUDED! Bog 406 shown in pictures also NOT INCLUDED. This listing is for the rear body attachment only, i.e. the rear crane and winch attachment ONLY!


Printer minimum build volume required - 256*230*100mm


All inner fenders need to be removed before installing. Aftermarket shocks and panhard mount are required if using with the M1070 truck cab. It is recommended to mount the battery behind the front grille, at the front of the chassis with a battery strap. Relocate receiver box and ESC to middle of chassis.


Designed specifically for the TRX6 (G63 version), this wrecker crane winch is meant to be paired with the M1070 HET truck cab for a complete build.


All 4 winch spools are fully operational, it requires 4 standard size servo winches. Two in the crane housing, and two towards the rear of the vehicle. The hole opening on the spools for the winch line is 3mm. You will need to source your own winch line, 1.7mm diameter nylon or polypropylene cord works very well, winch hooks are provided. Servo mounts with adjustable positioning are also provided. 


The crane boom can be hand adjusted to swing up and down, the height can be locked in place at 4 different positions. The inner boom is telescopic and can extend and retract, and be locked into 3 different positions.


The M1070 wrecker crane and winch body works best with a tyre to tyre width of 265mm, the fenders are 230mm wide. It’s also designed to be paired with 120mm diameter tyres. The rear assembly mounts onto a chassis mount which doubles up as rear shock towers. The chassis mount bolts directly into the rear chassis rails.


The complete build is very heavy, if you plan on using it for towing, it is highly recommended to use stiffer rear spring rates, replace the stock wheels with heavy metal beadlocks, stiffer wheel foams, and a stiffer tyre compound.


To use all functions on the truck (all 4 winch servos, front diff lock, rear diff lock, gear shift, steering, and ESC, a receiver and transmitter with at least 9 channels is recommended)



Features and details included:

  • Split bed and full bed versions. Both are equally strong

  • Adjustable locking crane boom actuator, non locking version also included

  • Adjustable locking inner boom, free sliding version included, 1 piece fixed inner and outer boom included

  • Winch spools can be servo winch operated, non servo version also included

  • Winch hooks and shackles are provided

  • Crane winch pulleys are 100% functional, having moving parts, and can swivel

  • Rear tow bar can swivel 360°

  • Mock hydraulic hoses included

  • Top light bar can take up to 19x 3mm LEDs

  • 2x styles of rear fenders

  • Intricate details and more!


Operation notes:

  • Remove driveshafts the vehicle being towed or put in neutral to reduce stress on crane parts and drivetrain

  • A lower and shorter position crane boom is less stressed than a high and extended one

  • Winch line should be spooled so that it unspools from the top.

  • 35kg servo winch minimum

  • Transmitter and receiver with minimum 9 channels ideal

  • Front weights in the cab may be needed depending on terrain steepness and weight of vehicle being towed


Printing tips:

  • Position crane boom to 45° on Z axis if it will not fit on 256mm bed

  • Print the crane actuator, actuator shaft, and hooks with 100% inflill as those are high stress points when towing


Be sure to check out the instruction manual and gather all required hardware for assembly.


It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.



All of these files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes. Files are embedded with trademarks. Violations will result in action being taken without exception.


  • Assembly Instructions

  • Printing Tips

    FDM printing:

    PLA+ or PETG filament

    0.2 layer heights

    30-70% infill density

    Supports are necessary

  • More pictures

    More pictures can be found here:

    More pictures

HK$150.00Price
bottom of page