DIGITAL FILE Crawler V303 4x4
PLEASE make sure your 3D printer is able to print a minimum size of 220x250x158mm before purchasing.
The Crawler V303 is pure utilitarian. Whether it is for hauling cargo or passengers, this van will go practically anywhere.
It’s designed specifically to fit on SCX10 ii, SCX10 iii, VS4-10 Pro, and TRX4 chassis with a standard short wheelbase of 290mm, outer tyre to tyre width of 230mm and maximum tyre height of 110mm.
The short wheelbase makes it a very nimble and capable crawler with lots of all around ground clearance, especially when accurately paired with portal axles.
Similar to our other body shells mounting the body to the chassis is made easy with the included body mounts, which are designed beefy, trail worthy, and with fore and aft adjustments.
Please ensure your printer can print a volume of 220x250x158mm.
*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual
Should you need any help, please do not hesitate to contact us!
Included Options
We’ve gone with the traditional route and packed a ton of functional features and details in this design.
-
All 5 doors have in-built function hinges, so no need to source your own hinges.
-
Roof hatch can also be opened with the included hinges.
-
Windshield can be flipped up or down just like in real life.
-
Front bumper towing recovery pin
-
Rear bumper towing hook.
-
High clearance version of the rear bumper is included (without the hook and hook mount.)
-
All light buckets are functional, use 5mm and 3mm LEDs.
-
Interior door panels with handles.
-
Sidesteps.
-
Detailed exhaust system.
-
Spare tyre carrier.
-
Included fuel can and carrier.
-
Detailed interior dashboard.
-
Required Hardware
-
41X M2*5 Socket head
-
22X M2*8 Socket head
-
20X M2*10 Socket head
-
3X M3*10 Socket head
-
14X M3*15 Socket head
-
4X M3*25 Socket head
-
2X M3*10 Button head
-
2X M3*15 Countersunk
-
4X M3*3 Grub screw
-
2X M3*10 Grub screw
-
2X M3*20 Grub screw
-
2X 1*6 Dowel Pin
-
Assembly Instructions
Printing Tips
FDM printing:
Requires a printer that can print a minimum volume of: 220x250x158mm.
PLA+ filament
0.2mm-0.3mm (0.4mm nozzle) layer heights
20-30% infill density
Supports are necessary
Finished and Assembled Size
Finished and assembled size:
525*218*177mm (All parts assembled excluding mirrors)
More pictures
More pictures can be found here: